How to Choose a Stud Finder

Posted by in Home Improvement Tips, on November 15, 2017

https://www.youtube.com/watch?v=5q6dPqGZn1Y

Watch the full episode: https://www.thisoldhouse.com/watch/ask-toh-tree-removal-garage-door-opener Ask This Old House general contractor Tom Silva demonstrates different ways to locate studs in a wall. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 5 minutes Cost: $5-50 Skill Level: Beginner Tools List for Choosing a Stud Finder:
Magnetic stud finder
Digital stud finders
Drill
Flathead screwdriver Steps:
1. There are several ways to locate studs in the wall- both low tech and high tech.
2. Use your knuckle against the wall to feel for a stud. If you hit a stud, the knock will feel more solid and sound slightly higher pitched.
3. Look for clues in the wall. Look for patched nail holes in baseboard trim, chair rails, or crown molding, since the trim was probably nailed to the studs. Use a small drill bit just above the baseboard to see if there’s a stud behind the wall or not.
4. Turn off the power at the electrical panel and check next to an outlet or light switch. Unscrew the cover plate and slide the screwdriver along the sides of the electrical box to see where it was mounted. Once that stud has been located, measure 16” or 24” on center from the stud to identify subsequent studs. 5. Purchase a magnetic stud finder. Slide it along the wall up and down and it will stick to any nails or screws that attach the drywall to the studs.
6. Purchase a digital stud finder. Slide it along the wall and the light will indicate when a stud has been located.
7. Another digital stud finder can indicate the width of a stud. Slide it along the wall and the lights will indicate stud location and width. Resources:
The magnetic stud finder Tom used is the StudBuddy (https://thestudbuddy.com). The electronic stud finder that can show the width of a stud is the ProFinder 5000+, manufactured by Franklin Sensors (http://franklinsensors.com). The electronic stud finder that can show pipes and wires hidden in a wall is manufactured by Zircon (http://www.zircon.com). Follow This Old House and Ask This Old House: Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse

Pinterest: http://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: http://instagram.com/thisoldhouse
Tumblr: http://thisoldhouse.tumblr.com/ For more stories like this from Bay Area Plumbing Headquarters, bookmark our site.

Leave a Reply

Your email address will not be published. Required fields are marked *