How to Match Mortar

Posted by in Home Improvement Tips, on May 1, 2018

https://www.youtube.com/watch?v=i2Bo56Hdin0

Ask This Old House mason Mark McCullough explains how to match mortar for repointing jobs. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 1 hour
Cost: $50 Skill Level: Moderate Tools List for Matching Mortar:
Buckets
Trowel Shopping List:
Lime
Sand
Portland cement
Scrap wood Steps:
1. If the mortar is not gray, then a dye was used. Take a small sample of the mortar, bring it to the nearest brickyard, and ask them to match the color for you.
2. If the mortar is gray, you might be able to get a close match with the premixed bags of mortar. The following steps are how to attempt an exact color match.
3. Take a couple small buckets and add proportions of lime and Portland cement. Keep close track of how much of each you put in each bucket. Adding more lime will make the mortar lighter and adding more Portland cement will make it darker.
4. Take two larger buckets with equal proportions of sand in them. Add the smaller buckets with the different lime/Portland cement mixtures to the buckets of sand and mix them with the trowel.
5. Add a little bit of water to each bucket and mix up the mortar. Add more water as necessary until the mortar is roughly an oatmeal texture.
6. Scoop out a small amount of each mixture onto the scrap wood with the trowel and very carefully peel back the blob so only a thin layer is on the wood. This will allow the mortar to dry faster.
7. Allow the mortar to dry and compare it to the joints requiring repointing. Keeping in mind that the mortar will continue to get lighter as it dries, pick the mixture that matches the mortar best. Use the same proportions as the ones you originally wrote down to mix a larger batch of mortar and begin repointing. Resources:
Matching mortar can be a trial-and-error job. Keep track of the quantities of lime, sand, and Portland cement used in each test sample and let each sample dry before matching it to the mortar being repointed. If the mortar is not gray, then it has a dye added to it. Locate the nearest brickyard and ask someone there to help match the color. Most of the materials required for matching and making mortar and also for repointing can be found at home centers and brickyards. Expert assistance for this segment was provided by MJM Masonry (http://mjmmasonry.com/). Ask This Old House TV
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
 
This Old House releases new segments every Sunday, Monday, Wednesday and Friday.
 
Keywords: This Old House, How-to, home improvement, DIY, ask this old house, mortar, repointing, brick, mark mccullough, kevin o'connor Watch the full episode: https://www.thisoldhouse.com/watch/paint-door-wood-joints-ask-toh Follow This Old House and Ask This Old House: Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse

Pinterest: http://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: http://instagram.com/thisoldhouse
Tumblr: http://thisoldhouse.tumblr.com/ For more stories like this from Bay Area Plumbing Headquarters, bookmark our site.

Leave a Reply

Your email address will not be published. Required fields are marked *