Revisiting Our Hybrid Water Heater Install

Posted by in Home Improvement Tips, on April 16, 2017

https://www.youtube.com/watch?v=Wzsr-B6MK_k

Watch the full episode: https://www.thisoldhouse.com/watch/ask-toh-hot-water-storm-door Ask This Old House Richard Trethewey returns to a home he visited four years earlier to replace a faulty water heater. https://www.thisoldhouse.com/how-to/how-to-install-hybrid-gas-water-heater Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 3-4 hours Cost: $5,000 Skill Level: Professional Tools List for Installing a Hybrid Water Heater:
Pipe wrenches
Torch
Pipe dope
Solder
PVC pipe primer and cement
Pipe cutter Shopping List:
Hybrid Water Heater
1” Copper pipes with fittings
3” PVC pipes with fittings Steps: 1. Unplug the electrical connections. 2. Turn the gas valve off. 3. Turn off the water supply to the current water heater. 4. Drain the current water heater using a hose into a utility sink or a bucket. 5. Break the connections on the current water heater by cutting the copper pipes with a pipe cutter and breaking the gas line nut connections using opposing force and pipe wrenches. 6. Mount the new hybrid water heater unit to the wall. 7. Use 3” PVC pipe for both the air intake piping and the exhaust flue products. Dry fit all the connections first. 8. Once the dry fittings are set, use PVC primer and cement to make the connections permanent. 9. Dry fit the copper water line connections into the unit and out of the unit using 1” copper. Be sure to clean each pipe with emery cloth for a tight connection.
10. Make permanent connections on the 1” copper pipe lines using flux, solder, and a torch. 11. Install a temperature and pressure relief valve on the water line. 12. Connect the gas line piping using pipe wrenches and opposing force. 13. Plug in the unit to an electrical outlet. 14. Turn the gas valve back on. Check for any leaks using a soap solution. Bubbles will show a leak. 15. Turn the water supply line back on. Check for any leaks in the copper pipes. Follow This Old House and Ask This Old House: Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse

Pinterest: http://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: http://instagram.com/thisoldhouse
Tumblr: http://thisoldhouse.tumblr.com/ For more stories like this from Bay Area Plumbing Headquarters, bookmark our site.

Leave a Reply

Your email address will not be published. Required fields are marked *